企业官网建设流程全解析

用Python脚本自动化测试EC20 4G模块的AT指令

在物联网开发中，频繁手动输入AT指令测试4G模块既耗时又容易出错。本文将介绍如何用Python脚本实现EC20模块的自动化测试，涵盖串口通信、指令批量执行和响应解析全流程。

1. 环境准备与基础配置

开始前需要准备以下硬件和软件环境：

• 硬件设备：

  • 移远EC20 4G模块
  • USB转TTL串口模块（如CH340、CP2102）
  • 4G天线和SIM卡

• 软件依赖：

  • Python 3.6+
  • pyserial库（pip install pyserial）
  • 可选：移远串口调试助手（用于对照测试）

连接硬件时需特别注意：

确保EC20模块的VCC引脚电压匹配（通常3.3V），错误供电可能损坏模块。建议先通过AT指令确认基础通信：

import serial ser = serial.Serial('COM3', 115200, timeout=1) ser.write(b'AT\r\n') response = ser.read(100) print(response.decode()) # 应输出'OK'

2. AT指令自动化测试框架设计

2.1 核心通信类封装

创建一个EC20Controller类处理底层串口通信：

class EC20Controller: def __init__(self, port, baudrate=115200): self.ser = serial.Serial(port, baudrate, timeout=2) def send_at_command(self, command, expected='OK', wait=1): self.ser.write((command + '\r\n').encode()) time.sleep(wait) response = self.ser.read_all().decode().strip() if expected not in response: raise Exception(f"指令{command}执行失败，响应：{response}") return response

2.2 常用指令测试用例

通过继承实现具体业务逻辑：

class EC20Tester(EC20Controller): def check_sim_status(self): return self.send_at_command('AT+CPIN?') def get_signal_quality(self): response = self.send_at_command('AT+CSQ') # 解析信号强度值（示例：+CSQ: 24,0 → RSSI=24） return int(response.split(':')[1].split(',')[0])

3. 高级功能自动化实现

3.1 TCP连接压力测试

模拟持续建立/断开TCP连接：

def tcp_stress_test(controller, host, port, cycles=100): for i in range(cycles): try: # 建立连接 controller.send_at_command(f'AT+QIOPEN=1,0,"TCP","{host}",{port}') # 发送测试数据 controller.send_at_command('AT+QISEND=0,5', '>') controller.send_at_command('hello', 'SEND OK') # 关闭连接 controller.send_at_command('AT+QICLOSE=0') print(f"第{i+1}次测试成功") except Exception as e: print(f"测试失败：{str(e)}")

3.2 MQTT协议自动化配置

封装MQTT全流程操作：

def mqtt_auto_config(controller): # 打开MQTT网络 controller.send_at_command('AT+QMTOPEN=1,"mqtt.eclipse.org",1883') # 连接服务器 controller.send_at_command('AT+QMTCONN=1,"python_client"') # 订阅主题 controller.send_at_command('AT+QMTSUB=1,1,"test/topic",1') # 发布消息 controller.send_at_command('AT+QMTPUBEX=1,0,0,0,"test/topic",16', '>') controller.send_at_command('{"status":"ok"}')

4. 异常处理与日志系统

4.1 健壮性增强设计

添加重试机制和超时控制：

def robust_command(controller, command, retries=3, delay=1): for attempt in range(retries): try: return controller.send_at_command(command) except Exception as e: if attempt == retries - 1: raise time.sleep(delay)

4.2 日志记录与分析

集成logging模块实现分级日志：

import logging logging.basicConfig( level=logging.INFO, format='%(asctime)s - %(levelname)s - %(message)s', handlers=[ logging.FileHandler('ec20_test.log'), logging.StreamHandler() ] ) class LoggedEC20Tester(EC20Tester): def send_at_command(self, command, **kwargs): logging.info(f"发送指令：{command}") try: response = super().send_at_command(command, **kwargs) logging.debug(f"收到响应：{response}") return response except Exception as e: logging.error(f"指令执行异常：{str(e)}") raise

5. 实战：批量模块配置工具

开发完整的配置工具示例：

def batch_configure(port, config_file): controller = LoggedEC20Tester(port) with open(config_file) as f: commands = [line.strip() for line in f if line.strip()] results = [] for cmd in commands: try: res = controller.send_at_command(cmd) results.append((cmd, '成功', res)) except Exception as e: results.append((cmd, '失败', str(e))) # 生成报告 report = "\n".join( f"{cmd[:30]:<32} {status:<8} {result[:50]}" for cmd, status, result in results ) with open('config_report.txt', 'w') as f: f.write(report)

使用方式：

python configure.py COM4 settings.txt

典型配置文件内容：

AT+CFUN=1 AT+CPIN? AT+CREG? AT+QICSGP=1,1,"APN" AT+QIACT=1